CoatOSil MP 200
Estimated Reading Time: < 1 minuteCoatOSil MP 200 silane is an epoxy-functional silane oligomer that may be considered for use as an adhesion promoter or [...]
Home > Chemist Collaboration > Coatings-Industrial > DTM
27th May 2020|
CoatOSil MP 200 silane is an epoxy-functional silane oligomer that may be considered for use as an adhesion promoter or [...]
30th September 2021|
Styrene-based polymers that are recyclable, have superior low-temperature properties and act like rubber without undergoing vulcanization.
12th August 2022|
Natural oil-based, solvent-free polyol. For use in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and casting [...]
1st June 2020|
These dispersions are designed for water-based 1-K and 2-K systems and can be used as crosslinkers and adhesion promoters for [...]
1st June 2020|
Mono-functional isocyanate derivative which neutralizes any free hydroxyl and amine groups present for in-can stabilization and prevention of premature gelling [...]
1st June 2020|
Improve the flexibility, elongation and impact resistance of epoxy coatings, without compromising chemical resistance.
1st June 2020|
Solvent-based grades supplied mainly as crosslinkers for hydroxyl-functional resins.
1st June 2020|
Moisture scavengers that create chain extension and crosslinking with moisture-cure, prepolymer 1K / 2K coatings and sealants.
26th March 2020|
Distilled fine metal powders. Optimally sized by screening and air classification.
26th March 2020|
Distilled fine metal powders. Optimally sized by screening and air classification.