Urethane Prepolymers
-
Adiprene Blocked Urethane Prepolymers
Adiprene® Blocked Urethane Prepolymers are based on a technology to control the cure of urethane elastomers. This technology effectively blocks the curing reaction until it is heat activated at the optimum time in the process. This enables the pouring of large and complex parts, and even facilitates the use of hand batching. Blocked systems can [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LF MDI Urethane Prepolymers
Adiprene® LF MDI prepolymers provide significant health and safety advantages due to low free isocyanate levels and the ability to cure with diols, in addition to a range of other suitable curatives. This ground-breaking innovation enables customers to pour parts with outstanding dynamic performance, excellent retention of properties, and high load bearing capabilities. Adiprene LF [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LFP C380
Adiprene® LFP C380 is a PPDI-terminated polycaprolactone prepolymer having very low free PPDI content (typical < 0.1%) for easier management of health and safety during handling. This prepolymer is similar to Adiprene PP 1096H in composition and performance. Adiprene LFP C380 yields high performance 93-96 shore A hardness elastomers when cured with Vibracure A 250 [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LFP E740
Adiprene® LFP E740 is a 60 Shore D PPDI ether prepolymer having very low free PPDI content (typical < 0.1%) for easier management of health and safety during handling. This prepolymer yields very high performance 59 - 61 Shore D hardness elastomer when cured with Vibracure® A 250. The high performance features of Adiprene LFP [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LFP pPDI Urethane Prepolymers
Adiprene® LF pPDI urethane prepolymers with <0.1% free isocyanate, offer elastomers designed to withstand extreme conditions, where excellent resistance to high and low temperature, water, and chemicals is critical to performance and long part life. They are often used in dynamic applications because of their long life with very low heat build-up from hysteresis and [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene PP 1095H
Adiprene® PP 1095H is a p-phenylene diisocyanate (PPDI) terminated polyester-based Adiprene prepolymer. PPDI, a special building block, is used to impart exceptional properties to polyester cast urethanes. When cured with Vibracure A 250 curative, a high quality 95 Shore A elastomer is achieved. The stress-train properties of this prepolymer are superior to TDI/MBCA or MDI/diol [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene PP 1096H
Adiprene® PP 1096H is a p-phenylene diisocyanate (PPDI) terminated polycaprolactone Adiprene prepolymer. PPDI, a special building block, is used to impart exceptional properties to polyester cast urethanes. When cured with Vibracure A 250 curative, a high quality 95 Shore A elastomer is achieved. The stress-train properties of this prepolymer are superior to TDI/MBCA or MDI/diol [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene pPDI and LF pPDI Urethane Prepolymers
Adiprene® pPDI and LF pPDI Urethane Prepolymers take conventional TDI technology to the next level of performance and safety. By reducing free TDI levels to below 0.1%, these systems greatly improve workplace industrial hygiene and enable the use of the PU prepolymer systems with lower viscosity, longer pot life and faster demolding. Adiprene LF TDI systems [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene TDI Urethane Prepolymers
Adiprene® TDI prepolymers can by used with Vibracure® curatives to produce elastomers for a range of demanding applications with outstanding toughness, abrasion resistance, load-bearing capacity, cut resistance and resistance to heat build-up. Adiprene urethane prepolymers are known industry-wide for their high quality and performance on the job. LANXESS Urethane Systems is on the leading edge of urethane [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Quasilan Urethane Prepolymers
Quasilan Urethane Prepolymers are moisture-curing products based on TDI prepolymers and supplied as low-viscosity, clear liquids. Their main use is in primers, binders, and surface coatings for porous substrates such as stone, concrete and jointing sands. Quasilan CT products can be applied by brush, roller or spray equipment at recommended working temperatures of 5 - [...]
$0.00 Market: Coatings-Construction, Construction Coatings, Waterproofing
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Royalcast Urethane Systems
Royalcast® Urethane Systems are castable plastics that provide the hardness, toughness and impact resistance of many engineering plastics in a two-component urethane system. Unlike thermoplastic engineering plastic materials, the low tooling costs and ease of use make Royalcast Urethane Systems the economical choice for low volume production. Royalcast Urethane Systems vary from clear to opaque [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Trixene Blocked Isocyanate Prepolymers
Trixene® Blocked Isocyanate Prepolymers differ from standard blocked isocyanate crosslinkers by incorporating a more labile blocking agent. It allows them to cure by a chemical mechanism under ambient conditions, rather than by thermal dissociation at elevated temperatures. Their main application is to improve the flexibility, elongation, and impact resistance of epoxy coatings, without compromising chemical [...]
$0.00 Market: Coatings-Industrial, Concrete Floor Coating, DTM, Metal Topcoat, Protective/Maintenance Coating
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess
