Beauty Balm WO

Sequence Trade Name INCI Name %
A Water 39.24
Verstatil® PC Phenoxyethanol; Caprylyl Glycol 4.50
Panthenol ; Aqua; Citric Acid 1.0
Zinc Sulfate 1.0
A1 Sodium Hyaluronate 0.10
B dermofeel® GO soft Polyglyceryl-2 Sesquioleate 2.50
Sorbitan Olivate 1.0
Hydrogenated Castor Oil 0.50
Dicaprylyl Ether; Tocopherol; Glycine Soja Oil 5.0
Butylene Glycol Dicaprylate/Dicaprate 3.50
dermofeel® sensolv Isoamyl Laurate 8.50
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine 1.0
Tocopherol; Helianthus Annuus Seed Oil 0.20
Tocopheryl Acetate; Helianthus Annuus Seed Oil 0.50
Cera Alba 2.0
B1 Squalane 6.0
Magnesium Stearate 0.70
B2 dermofeel® AP MB Ascorbyl Palmitate 0.10
B3 Titanium Dioxide; Caprylic/Capric Triglyceride; Polyhydroxystearic Acid; Stearic Acid; Alumina 10.0
Nylon-12 2.0
Titanium Dioxide (Nano); Silica 2.0
CI 77492 0.48
CI 77499 0.04
CI 77491 0.04
B4 Dimethicone 2.0
C Perfume 0.30
Alcohol 5.0

Manufacturing Procedure:

1. Heat phase A up to 80°C under stirring. Disperse phase A1. Adjust pH-value to 5.1 – 5.3. 2. Heat phase B1 up to 115°C under strong stirring until a clear solution results. Add phase B2. 3. Add components of phase B to phase B1/B2 and heat up to 80°C. Add phase B3 under medium stirring and stir until a clear solution is obtained. 4. Pre-mix phase B4 and mill until homogenous. 5. Add phase B4 to phase B/B1/B2/B3 and homogenize for 0.5 min using an Ultra-Turrax. 6. Emulsify phase A/A1 slowly and stepwise to phase B/B1/B2/B3/B4 under stirring. 7. Homogenize for 1-2 min. using an Ultra-Turrax. 8. Start to cool down under stirring. Add phase C below 30°C.