Exercise Proof Foundation
This robust foundation helps to prevent the smudging caused by sweat, yet maintains a lighter skin feel. Keep your face looking fresh and selfie ready throughout your tough workout!
| Phase | Trade Name | INCI Name | % |
| A | AXOL® C 62 Pellets | Glyceryl Stearate Citrate
|
3.0 |
| ABIL® EM 90 |
Cetyl PEG/PPG-10/1 Dimethicone |
0.60 | |
| TEGOSOFT® DEC | Diethylhexyl Carbonate
|
4.0 | |
| TEGOSOFT® OER | Oleyl Erucate
|
5.0 | |
| ABIL® Wax 9801 | Cetyl Dimethicone
|
2.0 | |
| B | TEGOSOFT® DEC | Diethylhexyl Carbonate | 4.0 |
|
Titanium Dioxide; Triethoxycaprylylsilane |
7.0 | ||
| Unipure Yellow LC 182 AS-EM (CI 77492, Iron Oxides, Triethoxycaprylylsilane) |
4.0 | ||
| Unipure Red LC 381 AS-EM (CI 77491, Iron Oxides, Triethoxycaprylylsilane) |
0.12 | ||
|
|
Unipure Black LC 989 AS-EM (CI 77499, Iron Oxides, Triethoxycaprylylsilane) |
0.08 | |
| C |
|
Glycerin | 4.0 |
| Water | 44.0 | ||
| EDTA | .10 | ||
| Butylene Glycol | 4.0 | ||
| TEGO® Carbomer 341 ER (2 % in water) |
Acrylates / C10-30 Alkyl Acrylate Crosspolymer | 20.0 | |
| D | Phenoxyethanol,Ethylhexylglycerin | .70 | |
| NaOH (10%) |
1.0 | ||
Procedure:
1. Prepare phase A, B, C, and heat A and C to 80 – 85 C.
2. Prepare phase B by dispersing the powder in oil with Ultra Turrax at 13500 rpm for 5 minutes.
3. Add B into A, stir well with hand stirring, keep A/B at 80 – 85 C.
4. Add phase C into A/B Homogenize with 20000rpm 90 seconds.
5. Cool down with hand stirring to 40 °C, phase inversion to O/W.
6. Homogenize again with 13500rpm, 30 seconds.
7. Add phase D stir well with hand stir.
2. Prepare phase B by dispersing the powder in oil with Ultra Turrax at 13500 rpm for 5 minutes.
3. Add B into A, stir well with hand stirring, keep A/B at 80 – 85 C.
4. Add phase C into A/B Homogenize with 20000rpm 90 seconds.
5. Cool down with hand stirring to 40 °C, phase inversion to O/W.
6. Homogenize again with 13500rpm, 30 seconds.
7. Add phase D stir well with hand stir.
