This Gentle Cleanser is sulphate-free and provides refreshing and mild skin rejuvenation. It is the perfect addition to your skin care routine!

Phase Ingredient INCI %w/w
A Deionized Water Aqua 55.90
Trisodium EDTA 0.10
Naturescrub Cocoa C50 Copernicia Cerifera (Carnauba) Wax 4.00
Titanium Dioxide/Glycerin Dispersion 1.00
Phenoxyethanol 0.50
Magnesium Aluminum Silicate 4.00
B Butylene Glycol 3.00
Vegetable Based Glycerin Glycerin 3.00
Xanthan Gum 0.50
C Sodium Cocoyl Isethionate/Water 20.00
Cocamidopropyl Betaine 7.50
D Citric Acid, 20% aq Solution Citric Acid/Water 0.50


Procedure for Gentle Cleanser

  1. Add Phase A ingredients in the order listed, one at a time using Connblade type mixing blade. Sprinkle the Magnesium Aluminum Silicate. Increase speed to very high as necessary to keep the bulk moving. This is a very thick phase.
  2. Once Phase A looks thick and uniform, mix Phase B ingredients together until fully dispersed and then add to Phase A. Continue mixing at a very high speed for 10 minutes or a little more until uniformly dispersed.
  3. Switch to an appropriate size side-sweep type blade, which almost touches the wall of the beaker. Keep mixing at a very low speed (less than 100 for 1 kg batch) once bulk looks uniform and then add Phase C ingredients one at a time. Particularly, add Cocamidopropyl Betaine using pipette on the beaker sidewall and also squirting in the centre. Continue mixing at a very slow speed.
  4. Keep mixing at 50 RPM for additional 15 minutes until batch looks uniform. Add the Citric Acid solution as required to achieve a pH of 6.0 ± 0.5. Keep mixing for additional 10 minutes.

Gentle Cleanser

Looking for more ideas and innovations for your next project? Check out our featured Grow your Know – Natural Shampoo Bars


Reference No. SC-2011