Cleanse your skin with this Hand and Body Soap! It is made with natural cleansing beads that help remove impurities and clean the skin.

Phase Ingredient INCI %w/w
A Sodium Hydroxide Sodium Hydroxide 9.43
Deionized Water Aqua 9.43
B Virgin Coconut Oil 21.21
Low Acid Castor Oil 7.07
C Propylene Glycol Propylene Glycol 16.29
Vegetable Based Glycerin Glycerin 32.57
Parfum/Fragrance 1.97
Fumed Silica 1.98
D NatureBead Cocoa C20 Carnauba Wax 1.00

 

Procedure for Hand and Body Soap

  1. Weigh Phase A ingredients into a separate beaker. Mix thoroughly until all the Sodium Hydroxide is fully dissolved.
  2. Weigh Phase B ingredients into a separate beaker. Mix until uniform.
  3. Add Phase B ingredients into Phase A. Mix at medium to high speed to keep uniformly dispersed at 63°C. After the soap traces, let it sit in room temperature overnight.
  4. Take soap base and add Phase C ingredients. Heat batch to 90°C – 100°C. Use slow mixing to expedite melting of the soap base.
  5. When the soap base is fully melted, add fumed silica to the batch. Mix on medium speed until homogeneous.
  6. Cool the batch to 70°C. Then, add Phase D ingredients. Mix on slow speed to disperse the beads. Maintain slow mixing until you are ready to pour in your molds.
  7. Cool the batch to 58°C and pour into soap molds. Let the soap fully solidify in room temperature before handling.

Hand and Body Soap

Looking for more ideas and innovations for your next project? Check out our featured Grow your Know – Natural Shampoo Bars

 

Reference No. SC-2012