Keep your hair style in place all day with this High Hold Spray Gel!

Ingredient INCI %w/w
Deionized Water Deionized Water 50.00
Stabileze™ QM Polymer PVM/MA Decadiene Crosspolymer 0.25
Deionized Water Deionized Water 46.65
PVP K-30 powder PVP 2.00
Germaben™ II Preservative Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben 0.70
Sodium Hydroxide (10% aqueous solution) Sodium Hydroxide 0.40

 

Procedure

  1. Heat the water to 80°C. Disperse Stabileze QM and mix rapidly for 30 minutes. Begin cooling to 30°C.
  2. In a side kettle, add PVP K-30 to the water and mix to dissolve.
  3. Add the Germaben II to the cooled Stabileze QM slowly with moderate mixing.
  4. Add the PVP K-30 mixture to the Stabileze QM mixture and continue mixing until uniform.
  5. Add half of the Sodium Hydroxide solution with slow mixing to avoid excess aeration.
  6. Continue to add the Sodium Hydroxide very slowly until the mixture clears and thickens slightly (pH approximately 5.0 – 5.2).

Specifications of High Hold Spray Gel

Appearance: Clear, low viscosity gel
pH: 5.0 – 5.2
Viscosity: 7,500 cP Brookfield RVT Spindle #4 at 10 rpm

High Hold Spray Gel

Looking for more ideas and innovations for your next project? Check out our featured Grow your Know – Natural Shampoo Bars

 

Reference No. 10019-22-1