This Multiple Application Deodorant is a cold processing oil-in-water deodorant that is suitable for applications as roll-on or pump spray based on ABIL Care 85 as an emulsifier.

ABIL® Care 85 is a silicone-based nonionic emulsifier for oil-in-water emulsions. This ingredient has a strong impact on the after-feel of emulsion preparations. TEGODEO® CW 90 is a DEO active ingredient, a highly effective odour absorber based on the zinc salt of ricinoleic acid. Due to its good deodorizing properties, TEGODEO® CW 90 is especially suitable for use in nonaerosol deo, deo-sticks, and deo-roll-on formulations with higher water content. TEGO® SMO 80 V is a hydrophilic emulsifier for O/W emulsions.

Phase Trade Name INCI Name %
A ABIL® Care 85 Bis-PEG/PPG-16/16 PEG/PPG16/16 Dimethicone; Caprylic/Capric Triglyceride 2.00
Cyclopentasiloxane 8.00
TEGODEO® CW 90E Zinc Ricinoleate; Tetrahydroxypropyl Ethylendiamine; Laureth-3; Propylene Glycol 3.00
Perfume Fragrance/Parfum 0.50
B TEGO® SMO 80 V Polysorbate 80 0.20
Water Aqua 81.17
Allantoin 0.10
Propylene Glycol 3.00
C Carbomer 0.20
Xanthan Gum 0.07
Mineral Oil (30 mPas) 1.06
D Sodium Hydroxide (10% in water) 0.70
E Preservative q.s.

 

Procedure for Multiple Application Deodorant 

  1. Add Phase A ingredients to Phase B ingredients with stirring*.
  2. Homogenize.
  3. Add Phase C ingredients and homogenize for a short time.
  4. Add Phase D ingredient and stir well.

*Important: if Phase A has to be charged into the vessel first, Phase B must be added without stirring.

Specifications

Viscosity: Brookfield RVT, sp. 4, 10 rpm: ~ 1.6 Pas
pH: 5.0 – 5.5

Multiple Application Deodorant

 

 

 

 

 

 

 

 

 

 

 

Looking for more ideas and formulations for your next project? Check out our featured Grow your Know – Natural Shampoo Bars

 

Reference No. MA 49/00-2