Achieve a shining and luscious lip that makes you the spotlight of the show with this Queen’s Lip Glossy Stain!
The formulation features ISOLAN® GPS which is a natural and PEG-free emulsifier fully based on renewable sources and offers excellent stabilization properties even at low emulsifier concentrations. TEGO® SP 13-6 is a polymer that provides the formula with a long-lasting effect and a glossy appearance for the product
| Phase | Trade Name | INCI Name | % w/w |
| A | ABIL® EM 90 | Cetyl PEG/PPG-10/1 Dimethicone | 1.00 |
| ISOLAN® GPS | Polyglyceryl-4 Diisostearate/Polyhydroxystearate/ Sebacate |
2.00 | |
| Isohexadecane | 6.0 | ||
| dermofeel® TocoBalance | Tocopherol, Helianthus Annuus (Sunflower) Seed Oil） | 0.50 | |
| CI 15850 PT/BP 1, Barium sulfate | 1.00 | ||
| ABIL® Wax 9801 | Cetyl Dimethicone | 2.00 | |
| Butylene/Ethylene/Styrene Copolymer Ethylene/Propylene/styrene Copolymer Hydrogenated Polyisobutene |
1.00 | ||
| Cyclomethicone | 5.00 | ||
| TEGOSOFT® PBE | PPG-14 Butyl Ether | 2.00 | |
| TEGO® SP 13-6 | Poly C10-30 Alkyl Acrylate | 1.00 | |
| B | Octyldodecanole | 25.00 | |
| Ethyl Cellulose | 4.00 | ||
| C | Water | 39.90 | |
| Sodium Chloride | 0.60 | ||
| Glycerin | 5.0 | ||
| D | Perfume | q.s. | |
| Alcohol | 3.00 | ||
| Verstatil® PC | Phenoxyethanol; Caprylyl Glycol | 1.00 |
Procedure for Queen’s Lip Glossy Stain
- Heat Phase B to 85°C and stir until uniform.
- Add Phase B into Phase A. Heat A/B to 80°C.
- Heat Phase C to 80°C.
- Add Phase C to Phase A/B at speed of 500 rpm.
- Homogenize (1 minute at 4000 rpm).
- Cool down to 40°C and add Phase D. Stir until uniform.
Remarks
Emulsion Viscosity: ~ 20,000 mPa·s (Brookfield RV DV-1, sp. 5, 10 rpm)
Looking for more ideas and innovations for your next project? Check out our featured Trends Blog: Carnival of Colour for Eye Cosmetics!
Queen’s Lip Glossy Stain Formulation No. CHN YG BR172-4
