Home > Resins
Resins
-
Adiprene Blocked Urethane Prepolymers
Adiprene® Blocked Urethane Prepolymers are based on a technology to control the cure of urethane elastomers. This technology effectively blocks the curing reaction until it is heat activated at the optimum time in the process. This enables the pouring of large and complex parts, and even facilitates the use of hand batching. Blocked systems can [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LF MDI Urethane Prepolymers
Adiprene® LF MDI prepolymers provide significant health and safety advantages due to low free isocyanate levels and the ability to cure with diols, in addition to a range of other suitable curatives. This ground-breaking innovation enables customers to pour parts with outstanding dynamic performance, excellent retention of properties, and high load bearing capabilities. Adiprene LF [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LFP C380
Adiprene® LFP C380 is a PPDI-terminated polycaprolactone prepolymer having very low free PPDI content (typical < 0.1%) for easier management of health and safety during handling. This prepolymer is similar to Adiprene PP 1096H in composition and performance. Adiprene LFP C380 yields high performance 93-96 shore A hardness elastomers when cured with Vibracure A 250 [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LFP E740
Adiprene® LFP E740 is a 60 Shore D PPDI ether prepolymer having very low free PPDI content (typical < 0.1%) for easier management of health and safety during handling. This prepolymer yields very high performance 59 - 61 Shore D hardness elastomer when cured with Vibracure® A 250. The high performance features of Adiprene LFP [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene LFP pPDI Urethane Prepolymers
Adiprene® LF pPDI urethane prepolymers with <0.1% free isocyanate, offer elastomers designed to withstand extreme conditions, where excellent resistance to high and low temperature, water, and chemicals is critical to performance and long part life. They are often used in dynamic applications because of their long life with very low heat build-up from hysteresis and [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene PP 1095H
Adiprene® PP 1095H is a p-phenylene diisocyanate (PPDI) terminated polyester-based Adiprene prepolymer. PPDI, a special building block, is used to impart exceptional properties to polyester cast urethanes. When cured with Vibracure A 250 curative, a high quality 95 Shore A elastomer is achieved. The stress-train properties of this prepolymer are superior to TDI/MBCA or MDI/diol [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene PP 1096H
Adiprene® PP 1096H is a p-phenylene diisocyanate (PPDI) terminated polycaprolactone Adiprene prepolymer. PPDI, a special building block, is used to impart exceptional properties to polyester cast urethanes. When cured with Vibracure A 250 curative, a high quality 95 Shore A elastomer is achieved. The stress-train properties of this prepolymer are superior to TDI/MBCA or MDI/diol [...]
$0.00 Market: Cast Elastomers, Elastomers, Rollers/Wheels
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene pPDI and LF pPDI Urethane Prepolymers
Adiprene® pPDI and LF pPDI Urethane Prepolymers take conventional TDI technology to the next level of performance and safety. By reducing free TDI levels to below 0.1%, these systems greatly improve workplace industrial hygiene and enable the use of the PU prepolymer systems with lower viscosity, longer pot life and faster demolding. Adiprene LF TDI systems [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Adiprene TDI Urethane Prepolymers
Adiprene® TDI prepolymers can by used with Vibracure® curatives to produce elastomers for a range of demanding applications with outstanding toughness, abrasion resistance, load-bearing capacity, cut resistance and resistance to heat build-up. Adiprene urethane prepolymers are known industry-wide for their high quality and performance on the job. LANXESS Urethane Systems is on the leading edge of urethane [...]
$0.00 Market: Cast Elastomers, Elastomers
Product Type: Resins
Product Category: Urethane Prepolymers
Supplier: Lanxess -
Cardolite® NX-9001
Cardolite® NX-9001 is a novolac (polyether) polyol based on renewable, cashew nutshell liquid (CNSL). Provides excellent water resistance resulting reduced moisture sensitivity, good hydrolytic stability, resistance to salt water, acid, and alkali solutions. Cardolite® NX-9001 offer fast cure and increased flexibility, and exhibits excellent bond strength and chemical resistance, especially alkaline resistance on concrete substrates. Adhesives: [...]
$0.00 Market: Adhesives, Coatings-Industrial, Coatings-Transportation, Construction Adhesive, General Industrial Adhesive, General Industrial Coatings, Protective/Maintenance Coating, Transportation Adhesive
Product Type: Curing Agents & Crosslinkers, Prepolymers & Polyols
Product Category: Polyether Polyols, Urethane Crosslinkers
Supplier: Cardolite -
Cardolite® NX-9201
Cardolite® NX-9201 is a di-functional CNSL polyester diol with reduced reactivity. It offers excellent moisture resistance and hydrolytic stability in aqueous solutions. Compatibility with polyether diols and Poly BD are outstanding, thus, when Cardolite® NX-9201 is blended with other diols, it shows significant improvement of hydrolytic stability. Cardolite® NX-9201 is more suitable for prepolymer synthesis [...]
$0.00 Market: Adhesives, Coatings-Construction, Coatings-Industrial, Coatings-Transportation, Construction Adhesive, Construction Coatings, Elastomers, Foam, General Industrial Adhesive, General Industrial Coatings, Industrial Elastomer, Metal Topcoat, Molded Foam/Seating & Auto
Product Type: Curing Agents & Crosslinkers, Prepolymers & Polyols
Product Category: Polyester Polyols, Urethane Crosslinkers
Supplier: Cardolite -
Cardolite® NX-9203
Cardolite® NX-9203 is a polyester diol based on cashew nutshell liquid technology. NX-9203 provides improved water resistance, reduced moisture sensitivity and it is suitable for 2K Polyurethane coatings and adhesives and sealants. It also has excellent compatibility with various diols and polyols, i.e. polyether diols and polybutadiene diols (PolyBD). Cardolite® NX-9203LP is a lower reactivity [...]
$0.00 Market: Adhesives, Coatings-Construction, Coatings-Industrial, Coatings-Transportation, Construction Adhesive, Construction Coatings, Elastomer, Foam, General Industrial Adhesive, General Industrial Coatings, Industrial Elastomer, Metal Topcoat, Molded Foam/Seating & Auto
Product Type: Curing Agents & Crosslinkers, Prepolymers & Polyols
Product Category: Polyester Polyols, Urethane Crosslinkers
Supplier: Cardolite
